Efficient of Adsorption and Desorption of Zinc Ion by using Multi-Walled Carbon Nanotube


Authors : Abdelbagi Mohamed Elnour; Sonay Sözüdoğru Ok

Volume/Issue : Volume 10 - 2025, Issue 5 - May


Google Scholar : https://tinyurl.com/5n88c7yb

DOI : https://doi.org/10.38124/ijisrt/25may1115

Note : A published paper may take 4-5 working days from the publication date to appear in PlumX Metrics, Semantic Scholar, and ResearchGate.


Abstract : In the present work was used functionalized multi walled Carbon nanotube (fMWCNTs) as an adsorbent for zinc ion (Zn2+) in the batch of adsorption and desorption systems. The characterization of multi-walled Carbon nanotube (MWCNTs-COOH) was performed by X-Ray diffraction (XRD) and Raman spectroscopy. Here, zinc sulphate (ZnSO4·7H2O) was used as sources of zinc ion at different concentrations (0, 10, 20, 30, 40 and 50 mg/l) in adsorption batch and used the diethylene triamine pentaacetic acid (DTPA) as the elution reagent to extracted adsorbed of Zn2+ in desorption experiments. In this study, the different parameters such as pH of adsorbate, contact time, adsorbent (FMWCNTs) dosage, agitation speed and temperature were fixed at 7, 12 h, 0.05 gm, 180 rpm, and 25 ◦C, respectively. The results show that the maximum adsorption efficiency of Zn2+ onto MWCNTs increases with the increase of concentration until 40 (mg/l) and then decreased was started. While, the maximum desorption capacity (84%) at low concentration (10 mg/l). According to the correlation coefficient values (R2 ) of the equilibrium isotherm models the adsorption data was a better fitted in Freundlich isotherm compared with Langmuir isotherm.

Keywords : Adsorption, Desorption, Mwcnts, Zn 2+ , Freundlich and Langmuir Isotherm.

References :

  1. Afkhami, M. Saber-Tehrani and H. Bagheri, “Simultaneous Removal of Heavy-Metal Ions in Wastewater Samples Using Nanoalumina Modified with 2,4-Dinitrophenylhydrazine,” Journal of Hazardous Materials, Vol. 181, No. 1-3, 2010, pp. 836-844. doi: 10.1016/j.jhazmat.2010.05.089  
  2. Ansari, M.A. Mehrabian and H. Hashemipour:  Zinc ion adsorption on carbon nanotubes in an aqueous solution. Pol. J. Chem. Tech., Vol. 14, No. 3, 2012
  3. Abdel Salam M, Makki MSI, Abdelaal MY (2011) Preparation and characterization of multi-walled carbon nanotubes/chitosan nanocomposite and its application for the removal of heavy metals from aqueous solution. J Alloy Compd 509:2582–2587
  4. Ahmed A. Moosa, Ali Mousa Ridha and Noor Amir Hussien: Removal of Zinc Ions from Aqueous Solution by Bioadsorbents and CNTs. American Journal of Materials Science 2016, 6(4): 105-114. DOI: 10.5923/j.materials.20160604.04 DOI: 10.5923/j.materials.20160604.04
  5. Alexander G. Masyutin, Dmitry V. Bagrov, Irina I. Vlasova, Igor I. Nikishin, Dmitry V. Klinov, Ksenia A. Sychevskaya, Galina E. Onishchenko and Maria V. Erokhina: Wall Thickness of Industrial Multi-Walled Carbon Nanotubes Is Not a Crucial Factor for Their Degradation by Sodium Hypochlorite. Nanomaterials 2018, 8, 715; doi:10.3390/nano8090715
  6. Lu and H. Chiu, “Adsorption of Zinc (ІІ) from Water with Purified Carbon Nanotubes,” Chemical Engineering Science, Vol. 61, No. 4, 2006, pp. 1138-1145.
  7. Lu and H. Chiu: Adsorption of zinc (II) from water with purified carbon nanotubes, Chemical Engineering Science 61 (2006) 1138 – 1145
  8. C.-H. Wu, “Studies of the Equilibrium and Thermodynamics of the Adsorption of Cu2+ onto As-Produced and Modified Carbon Nanotubes,” Journal of Colloid and Interface Science, Vol. 311, No. 2, 2007, pp. 338-346. doi: 10.1016/j.jcis.2007.02.077
  9. Chao-Yin Kuo: Desorption and re-adsorption of carbon nanotubes: Comparisons of sodium hydroxide and microwave irradiation processes. Journal of Hazardous Materials 152 (2008) 949–954
  10. Hansch, R., and Mendel, R.R. (2009). Physiological functions of mineral micronutrients (Cu, Zn, Mn, Fe, Ni, Mo, B, Cl). Current Opinion in Plant Biology, 12, 259–266.
  11. D. Rosca, F. Watari, M. Uo and T. Akasaka, “Oxidation of Multiwalled Carbon Nanotubes by Nitric Acid,” Carbon, Vol. 43, No. 15, 2005, pp. 3124-3131. doi: 10.1016/j.carbon.2005.06.019
  12. Langmuir: The constitution and fundamental properties of solids and liquids J Am Chem Soc, 38 (1916), pp. 2221-2295
  13. Kosa SA, Al-Zhrani G, Abdel Salam M (2012) Removal of heavy metals from aqueous solutions by multi-walled carbon nanotubes modified with 8-hydroxyquinoline. Chem Eng J 181–182:159–168
  14. M. Tehrani, P. Azar, P. Namin and S. Dehaghi, "Removal of Lead Ions from Wastewater Using Functionalized Multiwalled Carbon Nanotubes with Tris(2-Aminoethyl) Amine," Journal of Environmental Protection, Vol. 4 No. 6, 2013, pp. 529-536. doi: 10.4236/jep.2013.46062.
  15. Muataz Ali Atieh “Effect of Functionalized Carbon Nanofibers with Carboxylic Function Group on the Removal of Zinc from water” International Journal of Enviromental Science and Development, Vol. 2, No. 2, April 2011
  16. Muataz Ali Atieh, Omer Yehya Bakather, Bassam Al-Tawbini, Alaadin A. Bukhari, Faraj Ahmad Abuilaiwi, and Mohamed B. Fettouhi, “Effect of Carboxylic Functional Group Functionalized on Carbon Nanotubes Surface on the Removal of Lead from Water,” Bioinorganic Chemistry and Applications, vol. 2010, Article ID 603978, 9 pages, 2010. https://doi.org/10.1155/2010/603978.
  17. N. A. Kabbashi, M. A. Atieh and A. Al-Mamun, “Kinetic Adsorption of Application of Carbon Nanotubes for pb (II) Removal from Aqueous Solution,” Journal of Environmental Sciences, Vol. 21, No. 4, 2009, pp. 539-544
  18. Repo E, Petrus R, Sillanpaa MET, Warchol JK (2011c) Equilibrium studies on the adsorption of Co (II) and Ni (II) by modified silica gels: one-component and binary systems. Chem Eng J 172:376–385.
  19. Repo E, Warchol JK, Bhatnagar A, Sillanpaa MET (2011b) Heavy Metal Adsorption by Novel EDTA-Modified Chitosan-Silica Hybrid Materials. J Colloid Interface Sci 358:261–267.
  20. S. A. Dastgheib and D. A. Rocktraw, “A Model for the Adsorption of Single Metal Ion Solutes in Aqueous Solution onto Activated Carbon Produced from Pecan Shells,” Carbon, Vol. 40, No. 11, 2002, pp. 1843-1851. doi:10.1016/S0008-6223(02)00037-4.
  21. S. A. Dastgheib and D. A. Rocktraw, “A Model for the Adsorption of Single Metal Ion Solutes in Aqueous Solution onto Activated Carbon Produced from Pecan Shells,” Carbon, Vol. 40, No. 11, 2002, pp. 1843-1851. doi:10.1016/S0008-6223(02)00037-4.  
  22. Shaobo Zhang, Feiran Zhang, Yanfei Pan, Liping Jin, Bo Liu, Yi Mao and Jintian Huang: Multiwall-carbon-nanotube/cellulose composite fibers with enhanced mechanical and electrical properties by cellulose grafting. DOI: 10.1039/c7ra11304h. RSC Adv., 2018, 8, 5678
  23. Tariq Al Mgheer and Firas H Abdulrazzak (2016): Oxidation of multi-walled carbon nanotubes in acidic and basic Piranha mixture. Front Nanosci Nanotech, doi: 10.15761/FNN.1000127
  24. Wang, X., Han, H., Liu, X., Gu, X., Chen, K., and Lu, D. (2012): Multi-walled carbon nanotubes can enhance root elongation of wheat (Triticum aestivum) plant. 14: 841. https://doi.org/10.1007/s11051-012-0841-5.
  25. Y. Cui, S. Liu, Z.-J. Hu and X.-H. Liu, “Solid-Phase Extraction of Lead (‖) Ions Using Multiwalled Carbon Nanotubes Grafted with Tris (2-Aminoethyl) Amine,” Microchimica Acta, Vol. 174, No. 1-2, 2011, pp. 107-113. doi:10.1007/s00604-011-0601-8 [Citation Time(s):2]

In the present work was used functionalized multi walled Carbon nanotube (fMWCNTs) as an adsorbent for zinc ion (Zn2+) in the batch of adsorption and desorption systems. The characterization of multi-walled Carbon nanotube (MWCNTs-COOH) was performed by X-Ray diffraction (XRD) and Raman spectroscopy. Here, zinc sulphate (ZnSO4·7H2O) was used as sources of zinc ion at different concentrations (0, 10, 20, 30, 40 and 50 mg/l) in adsorption batch and used the diethylene triamine pentaacetic acid (DTPA) as the elution reagent to extracted adsorbed of Zn2+ in desorption experiments. In this study, the different parameters such as pH of adsorbate, contact time, adsorbent (FMWCNTs) dosage, agitation speed and temperature were fixed at 7, 12 h, 0.05 gm, 180 rpm, and 25 ◦C, respectively. The results show that the maximum adsorption efficiency of Zn2+ onto MWCNTs increases with the increase of concentration until 40 (mg/l) and then decreased was started. While, the maximum desorption capacity (84%) at low concentration (10 mg/l). According to the correlation coefficient values (R2 ) of the equilibrium isotherm models the adsorption data was a better fitted in Freundlich isotherm compared with Langmuir isotherm.

Keywords : Adsorption, Desorption, Mwcnts, Zn 2+ , Freundlich and Langmuir Isotherm.

CALL FOR PAPERS


Paper Submission Last Date
31 - July - 2025

Video Explanation for Published paper

Never miss an update from Papermashup

Get notified about the latest tutorials and downloads.

Subscribe by Email

Get alerts directly into your inbox after each post and stay updated.
Subscribe
OR

Subscribe by RSS

Add our RSS to your feedreader to get regular updates from us.
Subscribe