GFRP Composites Doped with Graphene Oxide Three-Point Bending Damage Detection using Acoustic Emission Technology


Authors : B. Ram; B. Prasanth; N. Akhil; M. Sunil Kumar

Volume/Issue : Volume 9 - 2024, Issue 12 - December

Google Scholar : https://tinyurl.com/2tvjm7ep

Scribd : https://tinyurl.com/4bt3hmdt

DOI : https://doi.org/10.5281/zenodo.14591124

Abstract : This study investigates the effects of graphene oxide (GO) doping on the mechanical performance and damage behavior of glass fiber reinforced polymer (GFRP) composites using acoustic emission (AE) technology. A series of GFRP specimens doped with varying concentrations of graphene oxide (0.5%, 1.0%, 1.5%, and 2.0%) were subjected to three-point bending tests to evaluate their flexural strength, stiffness, and failure modes. The addition of graphene oxide to GFRP composites was found to enhance both the load-bearing capacity and energy absorption, with optimal performance observed at 1.5% GO doping. Acoustic emission monitoring was employed during testing to detect and characterize real-time damage progression. AE signal analysis revealed that graphene oxide doping influences the initiation and propagation of damage, leading to changes in crack patterns, matrix failure, and fiber-matrix interactions. A correlation between AE signal features (amplitude, frequency, and energy) and specific failure mechanisms such as delamination, matrix cracking, and fiber pull- out was established.

Keywords : GFRP (Glass Fibre Reinforced Polymer), GO (Graphene Oxide), Epoxy Resins, Acoustic Emission Technology.

References :

  1. Shahkhosravi, N.A., Yousefi, J., Najafabadi, M.A., Burvill, C., and Minak, G. (2019). Fatigue life reduction of GFRP composites due to delamination associated with the introduction of functional discontinuities. Compos. B Eng. 163, 536–547.
  2. Verma, L., Andrew, J.J., Sivakumar, S.M., Balaganesan, G., Vedantam, S., and Dhakal, H.N. (2021). Evaluation of quasi-static indentation response of superelastic shape memory alloy embedded GFRP laminates using AE monitoring. Polym. Test. 93, 106942.
  3. He, H., Chen, W., Luo, B., Bian, K., Xiang, N., Yin, Y., Zhang, Z., Dai, M., and He, T. (2022). On the electrical breakdown of GFRP wind turbine blades due to direct lightning strokes. Renew. Energy 186, 974–985.
  4. Wang, P., Ke, L.-Y.-W., Wu, H.-L., Leung, C.K., and Li, W.-W. (2023). Hygrothermal aging effects on the diffusion-degradation process of GFRP composite: Experimental study and numerical simulation. Constr. Build. Mater. 379, 131075.
  5. Hofmann, M., Shahid, A.T., Machado, M., Garrido, M., Bordado, J.C., and Correia, J.R. (2022). GFRP biocomposites produced with a novel high-performance bio-based unsaturated polyester resin. Compos. Part A Appl. Sci. Manuf. 161, 107098.
  6. Das, S., Halder, S., Khan, N.I., Paul, B., and Goyat, M.S. (2020). Assessing damage mitigation by silanized milled graphite nanoparticles in hybrid GFRP laminated composites. Compos. Part A Appl. Sci. Manuf. 132, 105784.
  7. Zamani, P., Fm da Silva, L., Masoudi Nejad, R., Ghahremani Moghaddam, D., and Soltannia, B. (2022). Experimental study on mixing ratio effect of hybrid graphene nanoplatelet/nano- silica reinforcement on the static and fatigue life of aluminum-toGFRP bonded joints under four-point bending. Compos. Struct. 300, 116108.
  8. Xie, H., Cao, T., Rodrı´guez-Lozano, F.J., Luong-Van, E.K., and Rosa, V. (2017). Graphene for the development of the nextgeneration of biocomposites for dental and medical applications. Dent. Mater. 33, 765–774.
  9. Sari, F., and Ugurlu, M. (2023). Reinforcement of resin-modified glass-ionomer cement with glass fiber and graphene oxide. J. Mech. Behav. Biomed. Mater. 142, 105850.
  10. Fu, X., Lin, J., Liang, Z., Yao, R., Wu, W., Fang, Z., Zou, W., Wu, Z., Ning, H., and Peng, J. (2023). Graphene oxide as a promising nanofiller for polymer composite. Surf. Interfaces 37, 102747.
  11. Chen, L., Shen, Y., Yi, H., Liu, Z., and Song, Q. (2021). Mathematical modeling of heat transfer in GO-doped reinforce polymer for anti-/deicing of wind turbines. Int. Commun. Heat Mass Transf. 123, 105235.
  12. Zhao, J., Zhang, S., Ke, X., Pan, A., Zhou, Q., Zeng, S., Chen, P., Xu, Y., Nie, W., and Zhou, Y. (2023). Simultaneously tuning interfacial and interlaminar properties of glass fiber fabric/epoxy laminated composites via modifying fibers with graphene oxide. Compos. Sci. Technol. 235, 109970.
  13. Garcı´a Ma´rquez, F.P., and Peco Chaco´ n, A.M. (2020). A review of non-destructive testing on wind turbines blades. Renew. Energy 161, 998–1010.
  14. Gholizadeh, S., Leman, Z., and Baharudin, B.T.H.T. (2023). State-of-the-art ensemble learning and unsupervised learning in fatigue crack recognition of glass fiber reinforced polyester composite (GFRP) using acoustic emission. Ultrasonics 132, 106998.
  15. Jung, D., Yu, W.-R., Ahn, H., and Na, W. (2022). New b-value parameter for quantitatively monitoring the structural health of carbon fiber-reinforced composites. Mech. Syst. Signal Process. 165, 108328.

This study investigates the effects of graphene oxide (GO) doping on the mechanical performance and damage behavior of glass fiber reinforced polymer (GFRP) composites using acoustic emission (AE) technology. A series of GFRP specimens doped with varying concentrations of graphene oxide (0.5%, 1.0%, 1.5%, and 2.0%) were subjected to three-point bending tests to evaluate their flexural strength, stiffness, and failure modes. The addition of graphene oxide to GFRP composites was found to enhance both the load-bearing capacity and energy absorption, with optimal performance observed at 1.5% GO doping. Acoustic emission monitoring was employed during testing to detect and characterize real-time damage progression. AE signal analysis revealed that graphene oxide doping influences the initiation and propagation of damage, leading to changes in crack patterns, matrix failure, and fiber-matrix interactions. A correlation between AE signal features (amplitude, frequency, and energy) and specific failure mechanisms such as delamination, matrix cracking, and fiber pull- out was established.

Keywords : GFRP (Glass Fibre Reinforced Polymer), GO (Graphene Oxide), Epoxy Resins, Acoustic Emission Technology.

Never miss an update from Papermashup

Get notified about the latest tutorials and downloads.

Subscribe by Email

Get alerts directly into your inbox after each post and stay updated.
Subscribe
OR

Subscribe by RSS

Add our RSS to your feedreader to get regular updates from us.
Subscribe