Authors : Rizky Dwi Aulia Fajri; Muhamad Yusron; Muhamad Irfan Pratama Nurdiansyah; Muhamad Rizky; Yudi Prastyo

Volume/Issue : Volume 10 - 2025, Issue 1 - January

Google Scholar : https://tinyurl.com/mvkn9986

Scribd : https://tinyurl.com/ywcrtt4z

DOI : https://doi.org/10.5281/zenodo.14759693

Abstract : This study aims to improve the quality of sticker products in the printing process by optimizing the use of cutting machines at the labeling stage. The main focus of this research is to identify the main causes of defective products (reject) and find effective solutions to reduce the defect rate through improving working methods and machine parameters. The methods used include analysis of production data, measurement of defect levels, and the implementation of evaluation-based continuous improvement. The results show that the adjustment of the cutting speed, cutting angle, and periodic maintenance of the cutting machine significantly reduces the sorting rate. Thus, this research makes a real contribution in improving production efficiency as well as the quality of the final product in the sticker labeling process.

Keywords : Improving Production Quality and Efficiency.

References :

1. Fatma, N. F., Ponda, H., & As’seghaf, N. (2023). Usaha Pengoptimalan Efektivitas Proses produksi Percetakan Produk Pada Divisi Offset Di PT. Citra Sastra Grafika. Journal Industrial Manufacturing, 8(1), 89-104.
2. Hakim, Arif Rahman. "Peningkatan Kualitas Produk Dan Produktifitas Pada Proses Laser Marking Perankitan Integrated Circuit." PROFISIENSI: Jurnal Program Studi Teknik Industri 9.1 (2021): 170-177.
3. Nurhayati, Lilis, and Agrienta Bellanov. "Peningkatan Kualitas Produksi Kayu Dowel Sapu Dengan Pendekatan Metode Seven Tools Dan 5W+ 1H." journal of industrial and systems optimization 5.1 (2022): 39-46.
4. Absa, Abdul Saepul Milah, and Suseno Suseno. "Analisis Pengendalian Kualitas Produk Eq Spacing Dengan Metode Statistic Quality Control (SQC) Dan Failure Mode And Effects Analysis (FMEA) Pada PT. Sinar Semesta." Jurnal Teknologi dan Manajemen Industri Terapan 1.3 (2022): 183-201.
5. Abdillah, A. (2016). Penerapan Six Sigma Dalam Pengendalian Kualitas Produk Pada Industri Pengolahan Kayu (Studi Kasus: PD. Wonoagung Sejahtera, Kabupaten Gresik) (Doctoral dissertation, Universitas Brawijaya).
6. Wisnubroto, Petrus, and Arya Rukmana. "Pengendalian kualitas produk dengan pendekatan six sigma dan analisis kaizen serta new seven tools sebagai usaha pengurangan kecacatan produk." Jurnal Teknologi 8.1 (2015): 65-74.
7. Putri, Sekar Maharani, A. Harits Nu’man, and Puti Renosori. "Penyelesaian Masalah di Percetakan dengan Metode 5W+ 1H." Bandung Conference Series: Industrial Engineering Science. Vol. 3. No. 2. 2023.
8. Nurkholiq, Adita, Oyon Saryono, and Iwan Setiawan. "Analisis pengendalian kualitas (quality control) dalam meningkatkan kualitas produk." Jurnal Ekonologi Ilmu Manajemen 6.2 (2019): 393-399.
9. Suryani, L. (2015). Analisis dan peningkatan kualitas sistem informasi dengan menggunakan metode seven tools dan quality function deployment (QFD) (Doctoral dissertation, Institut Teknologi Sepuluh Nopember.
10. Yayan Saputra et al. (2019). "Improvement of Press Process Productivity in Automotive Industry." International Journal of Research in Engineering, Science and Management, Volume-2, Issue-5, May 2019.