Soil characterization for the manufacture of compressed earth blocks in bujumbura burundi| International Journal of Innovative Science and Research Technology

Soil Characterization for the Manufacture of Compressed Earth Blocks in Bujumbura, Burundi

Authors : Janvier Niyongabo; Jean Claude Ngenzi; Frigeant Bauma Bitamba; Daniel Hatungimana; Samuel Rudahinyuka

Volume/Issue : Volume 10 - 2025, Issue 10 - October

Google Scholar : https://tinyurl.com/yedz38v6

Scribd : https://tinyurl.com/baf6x2vs

DOI : https://doi.org/10.38124/ijisrt/25oct1597

PlumX Metrics

Semantic Scholar

ResearchGate

Note : A published paper may take 4-5 working days from the publication date to appear in PlumX Metrics, Semantic Scholar, and ResearchGate.

Note : Google Scholar may take 30 to 40 days to display the article.

Abstract : Social housing and urbanization policies in Burundi are ongoing, long-term projects, hence the need for large quantities of construction materials. The use of environmentally friendly construction materials such as earth bricks has a promising future. To prevent premature deterioration of civil engineering structures, in-depth studies of materials prior to their use are essential. It is within this framework that this study was initiated. It aims to determine the physical and mechanical properties of soils at potential sites for the manufacture of compressed earth blocks in Bujumbura, a region located in western Burundi. The samples taken underwent a complete geotechnical characterization, including grain size analysis by sieving and sedimentometry, consistency limits, and modified Proctor tests. The GTR classification (Technical Guide for the Construction of Embankments and Subgrades) identifies them as clayey sands (A1), materials that are acceptable for the manufacture of BTCs, either in their natural state or with the addition of clean sand to remove clay if necessary. The plasticity indices (PI) of 10.1% and 8.5%, liquidity limits WL of 34% and 33%, and Proctor optimums observed for maximum dry densities of 1.99 t/m3 and 1.994 t/m3 for 11.1% and 12% water, are characteristics that qualify them for the manufacture of BTC.

Keywords : Clayey Sand; Geotechnical Characterization; BTC; Burundi.

References :

1. Hussain M, Levacher D, Leblanc N, Zmamou H, Djeran-Maigre I, Razakamanantsoa A. Possible recycling of dredged sediments in earth bricks - case studies of marine, fluvial and dam sediments. In : XVIIèmes Journées, Chatou [Internet]. Editions Paralia ; 2022 [cité 29 oct 2025]. p. 765‑74. Disponible sur : http://www.paralia.fr/jngcgc/17_78_hussain.pdf
2. Nassar S. Valorisation des sédiments de dragage dans les constructions en terre.
3. NASRI M. CONSTRUCTION TRADITIONNELLE EN TERRE : RÉCONCILIATION DU CADRE BÂTI ANCIEN AU MODE DE VIE MODERNE EN ADOPTANT UNE STRATÉGIE DE SAUVEGARDE À TRAVERS LA RÉHABILITATION DU KSAR DE KHANGUET SIDI NADJI [Internet] [diplôma]. Université Mohamed Khider Biskra ; 2023 [cité 29 oct 2025]. Disponible sur : http://thesis.univ-biskra.dz/6213/
4. Analyse Granulométrique Des Solsp94 057 NF Mai1992 PDF | PDF [Internet]. [Cité 27 oct 2025]. Disponible sur : https://fr.scribd.com/document/367850660/52230602-Analyse-granulometrique-des-solsP94-057-NF-mai1992-pdf
5. Scribd [Internet]. [Cité 24 oct 2025]. NF EN 933-1 - Granulats - Analyse Granulométrique | PDF | Masse. Disponible sur : https://fr.scribd.com/document/591664097/NF-EN-933-1-Granulats-Analyse-granulometrique
6. PLACE EE. ESSAIS DE LABORATOIRE. 1973 [cité 18 août 2025] ; Disponible sur : http://www.mcours.net/cours/memoires/Essaisde_laboratoire_eten_placede_mecanique_des_sols_00.pdf
7. Scribd [Internet]. [Cité 27 oct 2025]. Analyse Granulométrique Des Solsp94 057 NF Mai1992 PDF | PDF. Disponible sur : https://fr.scribd.com/document/367850660/52230602-Analyse-granulometrique-des-solsP94-057-NF-mai1992-pdf
8. MethodeDEssai-LCPC-ME18.pdf [Internet]. [Cité 16 oct 2025]. Disponible sur : https://www.ifsttar.fr/fileadmin/user_upload/editions/lcpc/MethodeDEssai/MethodeDEssai-LCPC-ME18.pdf
9. Atlan Y. Catalogue des essais géotechniques exécutés au laboratoire géotechnique d’Orléans. Dép Géologie Bur Rech Biol Minière Serv Géologique Natl Ministère L’Industrie Commer L’Artisanat-78 SGN [Internet]. 1978 [cité 18 août 2025] ;178. Disponible sur : http://infoterre.brgm.fr/rapports/78-SGN-178-GEG.pdf
10. Scribd [Internet]. [Cité 27 oct 2025]. NF P 94-052-1 Limite Cone PDF | PDF. Disponible sur : https://fr.scribd.com/document/470277447/NF-P-94-052-1-limite-cone-pdf
11. Studocu [Internet]. [Cité 27 oct 2025]. Essai Proctor NF P 94-093 : Détermination des Caractéristiques de Compactage. Disponible sur : https://www.studocu.com/row/document/universite-sidi-mohamed-ben-abdellah-de-fes/ingenierie-et-energetique-du-batiment/p94-093-proctor/46794200
12. Scribd [Internet]. [Cité 28 oct 2025]. Règle PRO Mayotte 2022 | PDF | Mortier (matériau) | Mur. Disponible sur : https://fr.scribd.com/document/688986034/Regle-PRO-Mayotte-2022

Social housing and urbanization policies in Burundi are ongoing, long-term projects, hence the need for large quantities of construction materials. The use of environmentally friendly construction materials such as earth bricks has a promising future. To prevent premature deterioration of civil engineering structures, in-depth studies of materials prior to their use are essential. It is within this framework that this study was initiated. It aims to determine the physical and mechanical properties of soils at potential sites for the manufacture of compressed earth blocks in Bujumbura, a region located in western Burundi. The samples taken underwent a complete geotechnical characterization, including grain size analysis by sieving and sedimentometry, consistency limits, and modified Proctor tests. The GTR classification (Technical Guide for the Construction of Embankments and Subgrades) identifies them as clayey sands (A1), materials that are acceptable for the manufacture of BTCs, either in their natural state or with the addition of clean sand to remove clay if necessary. The plasticity indices (PI) of 10.1% and 8.5%, liquidity limits WL of 34% and 33%, and Proctor optimums observed for maximum dry densities of 1.99 t/m3 and 1.994 t/m3 for 11.1% and 12% water, are characteristics that qualify them for the manufacture of BTC.

Keywords : Clayey Sand; Geotechnical Characterization; BTC; Burundi.