Authors :
Ziad Abdo; Akrm Ali; Niyazi A. S. Al-Areqi; Mohammed Abduljalil; Riya Qaid Alansi
Volume/Issue :
2nd ICTSA-2022
Google Scholar :
https://bit.ly/3TmGbDi
Scribd :
https://bit.ly/3lRM7b0
DOI :
https://doi.org/10.5281/zenodo.7773504
Abstract :
The effect of using variable alkaline
mediums; sodium carbonate , sodium hydroxide and
ammonium hydroxide in different concentrations on onsite electrochemical production of sodium hypochlorite
using a single batch electrolysis cell as studied by
following up the rate of reaction and the pH
at specific
time intervals. Generally the rate of production increase
at 0.4 %w/v followed by 0.2 %w/v. Ammonia hydroxide
was not suitable as alkaline medium because there was
no significant increase in production rate at 0.2 %w/v0.4
%w/v , reaction was very slow and sodium hypochlorite
did not firmed at higher concentration. The optimum
P
H
to get best production rate was between (8 -8.5
Keywords :
Sodium Hypochlorite; Electrochemichal Production; Sodium Chloride
The effect of using variable alkaline
mediums; sodium carbonate , sodium hydroxide and
ammonium hydroxide in different concentrations on onsite electrochemical production of sodium hypochlorite
using a single batch electrolysis cell as studied by
following up the rate of reaction and the pH
at specific
time intervals. Generally the rate of production increase
at 0.4 %w/v followed by 0.2 %w/v. Ammonia hydroxide
was not suitable as alkaline medium because there was
no significant increase in production rate at 0.2 %w/v0.4
%w/v , reaction was very slow and sodium hypochlorite
did not firmed at higher concentration. The optimum
P
H
to get best production rate was between (8 -8.5
Keywords :
Sodium Hypochlorite; Electrochemichal Production; Sodium Chloride
